A checklist will help you properly prepare for your home’s inspection and aid in a more timely process. The timeframe for conducting a home inspection is generally 10 to 15 days after a contract is executed, so time is of the essence.
An inspection includes the roof system, structural components, electrical systems, plumbing systems, HVAC (ventilation, and air conditioning) systems, interior components (walls, ceilings, floors, doors, windows, garage), exterior components (siding, trim, flashing, drainage), and site conditions that affect the structure. Other inspections, like Wind Mitigation Reports and 4-Point Inspections include components of these key areas, with varied specificity. If the inspector is able to easily access all these components and verify related documentation, this helps in providing an accurate assessment of the home and ensuring all parties are properly informed in order to make their decision.
To better help homeowners and real estate agents prepare for a home inspection, we’ve put together a checklist detailing key points and what purpose they serve. The goal is a clear, safe visit and useful information for the buyer.
Before the appointment
- Confirm the logistics. Verify the date, approximate duration, who will attend, and how the inspector will enter. Confirm arrangements with tenants or other occupants, too. Follow the purchase contract and brokerage procedures for access.
- Compile questions for after completion. Often times homeowners will have questions or concerns that they would like to propose to the inspector. For a thorough assessment, its advisable to allow the inspector room to work and either direct questions through your realtor or have those questions ready for after the inspection is completed. At Coast to Coast, our inspectors are more than happy to share and/or explain our process and procedures.
- Make the home easy to navigate. Unlock relevant doors and gates, secure pets elsewhere, and clear walkways, stairs, closets, and garage access. Put away items that could be tripped over or damaged.
- Keep utilities on. Unless the contract or a safety concern dictates otherwise, make sure electricity, water, and fuel serving the home are available. An inspector may be unable to operate equipment if utilities are off.
- Prepare for the weather. Clear access to exterior equipment and drainage areas. If storms or heavy rain are expected prior to inspection, ensure access is not compromised.

Finish To-Do List
Everyone has a longstanding To-Do list and completing it before the home inspection couldn’t be more timely. Aside from ensuring simple things are not flagged in an inspection, these simple fixes go a long way towards preventing costly repairs and ensuring the proper performance of your home.
- Replace batteries (fire alarms, smoke detectors, carbon monoxide detectors) and light bulbs.
- Replace electrical outlet cover plates – outlet switches and cover plates can get damaged or exposed over time causing serious risk.
- Change A/C filter
- Re-caulk around bathtubs and sinks.
- Replace or fix damaged flooring
- Check and remove any drain clogs – major plumbing issues should always be assessed and addressed by a licensed plumbing technician.
- Replace torn screens and compromised windows.
- Replace any missing roofing and damaged insulation in the attic and crawl space.
- Remove debris and trim overhanging trees covering the roof – should be an ongoing maintenance item.
- Clear gutters and downspout drainage of debris to allow proper rain runoff.
- Clear excessive foliage and shrubbery from around the outside A/C compressor.
Facilitate access
Attic: Locate the hatch or pull-down stairs, move stored items away, and make sure the opening is not blocked by furniture or shelving. Do not ask the inspector to climb over stored belongings or enter an area that appears unsafe. Inspectors are not required to enter the attic if it is deemed unsafe, inaccessible, or could cause property damage.
Electrical panel: Clear boxes, tools, vehicles, and storage from around the main panel and any subpanels. Make sure the panel door can open fully. Leave its labels visible. Do not remove the panel cover or attempt electrical work; that is for a qualified professional. In Florida, the electrical panel should have the following accessibility:
- Depth: Should have clearance of at least 36 inches in front of the enclosure
- Width: Should have at least 30 inches wide clearance
- Height: 6.5 feet (78 inches) of the area from the floor or platform must be unobstructed
HVAC: Clear space around indoor air handlers, thermostats, outdoor condensers, and any accessible filters or service areas. Make the thermostat easy to find. If the system has unusual controls, multiple zones, or a known operating restriction, leave instructions.
Plumbing and water heater: Clear access to the water heater, visible shutoff valves, sinks, tubs, showers, and laundry hookups. Move stored items away from under sinks and around exposed piping. Identify the main water shutoff, if known. Do not hide active leaks or block access with personal belongings.
Other areas: Unlock garages, utility rooms, crawlspace access, pool equipment enclosures, sheds, and gates that are part of the inspection. Keep attic, garage, and storage access paths clear enough for safe viewing.
Inspectors generally assess what is readily accessible; they do not dismantle the home or move heavy stored items to reach concealed components. Access helps them see more of the property, but it does not authorize unsafe entry. When areas are inaccessible, it is documented which may prompt delays, questions, or follow-ups which can either prolong the process or garner unnecessary scrutiny.
Gather home records and documents
Put documents in one labeled folder or share them in advance. Useful records may include:
- Roof: Installation or replacement invoices, contractor details, permits, final inspection or permit-closure records, warranties, repair receipts, and any roof inspection or wind-mitigation report.
- Major systems: HVAC service and replacement records, equipment manuals, warranty information, water heater details, plumbing repairs, electrical work invoices, and appliance documentation.
- Improvements: Permits and final approvals for renovations, additions, windows, doors, electrical, plumbing, roofing, HVAC, pools, or other permitted work. If a permit may still be open, tell the agent so it can be checked with the local building department.
- Past events and repairs: Receipts or reports for water intrusion, storm damage, mold remediation, pest treatment, foundation or structural repairs, and insurance claims, where relevant.
- System details: Approximate installation dates, model and serial numbers, filter sizes, service providers, and any known quirks—such as an irrigation timer, well or septic system, generator, solar equipment, or pool controls.
Records allow the inspector to consider what was done and when. They do not replace the inspection or provide any guarantee of a system’s remaining life, but they do provide context and assist in applying prioritization to any observations.
Make the visit straightforward
On inspection day, keep lights accessible, open interior doors, and leave keys or remotes available to inspector. Avoid running laundry, dishwashers, or other activities that occupy fixtures or block access – turning on appliances and checking their operation is part of the inspection. If the seller has a security system, provide agreed entry instructions and explain any cameras or alarms that could affect access.
If an area cannot be opened or equipment cannot be operated, tell the agents before the appointment. This will go well for managing expectations with the buyer. As you would expect, it is never a good idea to conceal a condition, stage a repair, or reset equipment in a way that could create risk.
Encourage accurate, complete communication
It is advisable for sellers to review their disclosures and tell their agent about known leaks, past repairs, recurring moisture, roof or system problems, permit questions, or other facts that may materially affect the property and may not be obvious to a buyer. The agent can then inform the inspector in order to better assess the home’s condition and provide recommendation(s) for next steps, if any.
A little preparation makes the inspection more productive: provide safe access, leave useful records ready, keep systems available where appropriate, and communicate openly. That gives the inspector a better chance to view accessible components and helps all parties understand what the home’s condition and history show.

